Only show results in Virginia? Ok

Applications

  • Premium

    Pool Water Testing / Spa Water Testing

    Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Air pollution control for the coating industry

    Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the metal decorating industry

    Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the natural gas processing industry

    The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the remediation industry

    The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Chromatography laboratory instrumentation for feed industry

    To produce efficiently several feed formulations starting from continuously changing raw materials and premixes, require flexible and accurate analytical and formulation technologies. BUCHI offers dedicated solutions for the entire value chain: from R&D and QC laboratories to the production lines.

    By B√úCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Temperature measurement and control devices for engineering firms sector

    TTEC has over 25 years of Project Experience in the Power & Process Industries. -Our complete capability includes all project Thermocouples, RTDs, Thermowells, Thermocouple Wire, Junction Boxes and all mounting plates/hardware. Support services include all Project deliverables, milestone reports, shipment tracking and all required Vendor data. Vendor data typically includes Drawings, QA/QC Manuals, custom I/M Manuals, Recommended Spare Parts Lists, Data Sheets, Calculations, Test Reports, SBOM`s & Packing...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Analytical instruments for pharma & life science industry

    Discover Analytik Jena’s molecular biology and chemical analysis solutions for the pharmaceutical and life science industries. All of the solutions can be automated to a high degree thanks to our extensive liquid handling portfolio. Whether nucleic acid extraction, protein analysis with ICP-MS or various PCR and qPCR/Real-time PCR solutions, early research, or the evaluation in clinical studies, our technologies and methods will increase efficiency of your entire workflow.

    By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY.

  • Premium

    VOC and HAP Abatement

    As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than 99%.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and being developed at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Oil Spill Eater II (OSE) for energy storage and fuel storage leaks

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Air pollution control for the automotive industry

    Anguil`s engineering expertise has led to numerous successful air pollution control and emission control installations in the automotive manufacturing industry. From painting vehicles to engine test stations and tire manufacturing, we have supplied oxidizers and heat recovery systems to both tier 1 and tier 2 automotive plants.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Hand-Held & process control water testing instrument for Deionized water testing industry

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Temperature measurement and control devices for food & beverage industry

    TTEC sensors are utilized in many Food & Beverage applications. These products allow our customers to achieve the product quality & consistency required with each batch processed. Some of these Industries include Boxed &Ground Beef, Chocolate & Cocoa, Dairy, Pork, Chicken & Turkey, Snack Foods, Food Ingredients, Sweeteners & Sugar, Flavorings & Application Technologies, Bulk Food Transport & Storage, Brewing/Specialty malts and Seafood Processing.

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Machineries for metals shredding & recycling

    Shred-Tech®’s high torque Industrial Shredders can found in many of the world’s largest primary and secondary metal recycling and processing facilities. Shred-Tech®’s applications range from high volume magnesium sprue & runner reduction at over 60 TPH to one of the toughest applications known, the reduction of titanium plate and sheet stock. These slow speed shear shredders reduce shred materials such as baled aluminum, bailed radiators, ACSR cable, industrial, military and consumer...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for e-waste shredding & recycling

    Governments and manufacturers of electronic hardware are increasingly coming under pressure regarding the safe disposal of electronic waste once their useful life has been completed. End-of-life (EOL) legislation for e-scrap is in place in many countries and pending throughout Europe and North America. Shred-Tech® has engineered and manufactured custom systems to shred, separate and recover the component materials that make up these electronic products.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for beverage container recycling

    Every beverage bottling facility requires a cost efficient, clean method for the disposition of out of date or out of spec products. Shred-Tech® has been providing solutions to suit this need for many years. All shapes and sizes of cans, plastic bottles and aseptic packaging have been processed using our systems.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for product destruction & recovery

    Complete Turnkey Systems, custom designed and manufactured by Shred-Tech®, destroy, recover and separate a wide variety of off-spec, mis-packaged and out-dated products. Shred-Tech®’s Material Separation and Recovery / Destruction Systems are used around the world for recovering precious metals from computers and telecommunications scrap, nylon from carpet, and recyclables from MSW, just to name a few. Mis-packaged consumer products such as breakfast cereals, cosmetics, milk and juice containers,...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Elemental analysis for the chemistry & materials industry

    Analytik Jena’s high-performance instruments will provide you with a deeper understanding of the chemical composition and characteristics of advanced materials and chemical products, both in research and quality control. Our highly effective analysis instruments not only simplify your daily routine work, but also improve your products over the long term thanks to higher precision in your measurement data.

    By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY.

  • Premium

    Industrial gas detection solutions for semiconductor manufacturing processes sector

    Semiconductor manufacturing processes involve highly toxic substances and flammable gases. Our ChemLogic 96 Continuous and DOD64 FTIR Sequential gas analyzers are staples in this industry with over 1,000 machines operating every day worldwide. Our gas analyzers can be found in a few different places throughout a fabrication facility such as: In the Wafer Reactor, Wafer Dryer, Gas Cabinets, and during Chemical Vapor Deposition. Our units are designed with clean environments in mind. With a sample draw of 400 feet...

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you